Functional ankle brace with air padding
protect.Ankle air is an ankle joint brace. The product is exclusively to be used for the orthotic fitting of the ankle joint and only on unbroken skin
Rigid shells provide very good stabilisation in pronation and supination movements
The padding adapts to the varying anatomical conditions and provides a uniform compression
Open all the Velcro bands and Velcro fasteners.
Adjust the width of the heel. Position the part that goes under the heel using the Velcro fasteners so that the side parts fit well to the ankle.
Put the ankle at a 90 degree angle. Put the orthosis on in such a way that the heel is in the middle of the piece that goes under it and the side parts are adjusted to the ankle.
Close the bottom Velcro fastener first and make sure that the side parts remain parallel.
Close the top Velcro band.
Pull one strap tight or pull on both straps alternately until the orthosis is firmly in place and does not exert too much pressure on the ankle. Using the included pump, you can regulate the air content of the blister and thus individually adjust the comfort level for yourself. One nozzle of the pump is used for inflation and the other for deflation.
PP, PU, Velours
Velcro fasteners should be closed for washing.
Wash the product by hand, preferably using medi clean washing agent.
- Do not bleach.
- Leave to dry naturally.
- Do not iron.
- Do not dry clean.
- Conservative and post-operative care of fibular ligament ankle injuries (grade II to III)
- After distorsions
- Chronic instabilities of the ankle
Mon. to Thu. 08.00-17.00
- 02 9890 8696
- 02 9890 8439